# Radiometric vs Imaging Thermal Core: Which Do You Need?

Radiometric or imaging 640 × 512 thermal core? One question decides it, plus how the two differ in frame rate, outputs, lens focus and ambient range.

Source: https://thermal.torsuntech.com/resources/radiometric-vs-imaging-thermal-core/

[Resources](https://thermal.torsuntech.com/resources/) / Radiometric or imaging

# Radiometric or not? Choosing between a temperature-measuring thermal core and an imaging core

Most new thermal projects start with the same question: do we need a module that measures temperature, or is a thermal picture enough? The two look alike on a datasheet, both 640 × 512 with 12 μm pixels, but they are built for different jobs and differ in more than the temperature output. Here is how to decide, with MINI 640-2 Radiometric and the MINI 640-2 imaging core as the example.

## The one question that decides it

Does your product need a number? If it has to raise an alarm above a set temperature, log readings, compare one part with another or report a value, you need a radiometric core. If it only has to show where something warm is, so that a person or your software can see it, an imaging core is enough.

## Why the picture is not a measurement

An imaging core stretches its picture with automatic gain so that the scene fills the grey scale, and its signal is not calibrated against temperature. The same grey level can mean 20°C in one frame and 35°C in the next. You can find a warm object in that picture, but you cannot read its temperature from pixel brightness. A radiometric core is calibrated so that every pixel maps to a temperature; on MINI 640-2 Radiometric, in two ranges, −20°C to 150°C and 100°C to 650°C, with typical accuracy of ±2°C or ±2%.

## What else differs on these two cores

- Frame rate: 60 Hz on the imaging core, 30 Hz on the radiometric core.

- Video outputs: the imaging core gives analogue CVBS (PAL / NTSC) and USB 2.0; the radiometric core has digital outputs only, USB 2.0, MIPI (2-lane) or DVP, all carrying temperature data.

- Standard lens and focus: the imaging core’s 9.1 mm F0.8 lens is sharp from 1.5 m to infinity; the radiometric core’s 9.1 mm F1.1 lens is fixed focus and sharp from 1.2 to 5.5 m. On both cores, longer lenses (13.5 mm, 18 mm) are non-standard and ship within 15 working days of payment; on the radiometric core the lens is part of the temperature calibration, so it is fitted and calibrated at the factory, not swapped later.

- Ambient range: both image from −40°C to +80°C, but the radiometric core measures only from −10°C to +70°C ambient.

- Software: over USB, both show a picture on a Windows PC with no driver to install. Temperatures from the radiometric core’s USB version come through TSDK, our SDK for it, with builds for Linux (Ubuntu, Raspberry Pi and Jetson); it has been tested on our modules, comes at no extra charge and is provided after payment.

- Power at 5 V: under 0.7 W for the radiometric core and 650 mW or less for the imaging core (typical, USB output, 25°C).

## Typical jobs for each

- Imaging core: seeing at night, drone and vehicle cameras, FPV, perimeter observation, finding people or animals, spotting where something is warm.

- Radiometric core: equipment and electrical inspection, process monitoring, fire and overheating alarms with a threshold, robots that report readings, anything that logs temperatures.

## Common mistakes

- Buying a radiometric core for a long-range drone camera, then finding its standard lens is sharp only up to 5.5 m.

- Buying an imaging core and trying to read temperatures from the grey level.

- Planning an analogue video link for a radiometric core that has no analogue output.

- Forgetting that a radiometric product still has to deal with emissivity, reflections and any window in front of the lens.

## If you are unsure

Write down what your product does with the thermal data. If any step needs a temperature value, choose radiometric. If every step is “see”, “detect” or “show”, the imaging core is the simpler choice.

Both cores are in stock, with no minimum order.

[Compare the thermal modules](https://thermal.torsuntech.com/resources/imaging-module-comparison/)

## Related guides

- [“±2°C or ±2%”: what a radiometric module’s accuracy figure means on a real target](https://thermal.torsuntech.com/resources/thermal-camera-temperature-accuracy/)

- [Reading a thermal camera core datasheet: what each number means and the conditions behind it](https://thermal.torsuntech.com/resources/thermal-camera-core-datasheet/)

- [Close-range electrical inspection with a wide-angle radiometric thermal core: field of view, focus and emissivity](https://thermal.torsuntech.com/resources/wide-angle-thermal-electrical-inspection/)

## Not sure which core fits?

Tell us what the product does with the thermal data. We reply within 24 hours on working days.

[Discuss your requirements](https://thermal.torsuntech.com/contact/)

---

TORSUN TECH · CATC Building 2, Shipai Town, Dongguan, Guangdong, China · info@torsuntech.com · Tel / WeChat / WhatsApp +86 180 2518 5996 · Enquiry: https://thermal.torsuntech.com/contact/
