# Finding People From a Drone at Night: Thermal Core Guide

Finding people from a drone at night with a 640 × 512 thermal core: pixels on target at 30–120 m, ground footprint, lens focus, motion smear and conditions.

Source: https://thermal.torsuntech.com/resources/drone-thermal-camera-finding-people/

[Resources](https://thermal.torsuntech.com/resources/) / Finding people from a drone

# Finding people from a drone at night: resolution, lens and altitude for a thermal core

For search and rescue, wildlife surveys and livestock checks over open ground, the thermal camera’s job is to make a person or an animal stand out from the background, often from 50 to 120 m up. Whether it works depends on how many pixels the target covers at your altitude, whether the lens is sharp at that distance, and how fast the drone moves. Here is the arithmetic, with the MINI 640-2 imaging core as the example (640 × 512, 12 μm, 9.1 mm F0.8 lens). Pixel sizes, footprints and smear below are calculated.

## You probably do not need a radiometric core

Finding a person is about contrast, not temperature values. An imaging core shows a warm body against cooler ground and is the simpler choice. A radiometric core only helps if you must report temperatures, and the standard lens on our radiometric version is focused for short range, so check the lens before you choose it for a drone.

## Pixels on the target

Looking straight down, a pixel at the centre of the image covers IFOV × altitude; towards the edges each pixel covers more ground. With the 9.1 mm lens (IFOV 1.33 mrad):

- 30 m: about 4 cm per pixel, so a person about 0.5 m across the shoulders is about 12 pixels across

- 50 m: about 6.7 cm, about 7.5 pixels across

- 100 m: about 13 cm, about 4 pixels across

- 120 m: about 16 cm, about 3 pixels across

These counts are across the shoulders; front to back (about 0.3 m) a person spans only about 60% as many. A few pixels are enough to see that something warm is there; telling a person from an animal or a warm rock needs clearly more. Search higher to cover ground, then come down to check.

## Brochure ranges assume a standing person

The maker lists detection at 1 km, recognition at 250 m and identification at 125 m for a standing person (2 × 0.5 × 0.3 m) with this lens. From above you see shoulders and head, a much smaller target, and conditions are rarely ideal. Use pixels on target at your real altitude instead of the brochure ranges.

## Footprint: how much ground each frame covers

The lens covers 48.7° × 39.0°. Straight down, that is about 45 × 35 m of ground at 50 m and about 91 × 71 m at 100 m. Set the camera so its wider (640-pixel) side lies across your flight line; lane spacing is that width less the overlap you allow.

## Focus

The imaging core’s 9.1 mm F0.8 lens is fixed focus and sharp from 1.5 m to infinity, so it suits flight altitudes as it comes. Longer lenses (13.5 mm, 18 mm) put more pixels on a target from higher up but narrow the footprint; on this core they are non-standard and ship within 15 working days of payment; confirm their focus range for your altitude before ordering.

## Motion

Uncooled pixels respond with a thermal time constant, typically 10–15 ms; the figures here use 15 ms. At a ground speed of 10 m/s the image smears by about 15 cm, about one pixel at 100 m and two at 50 m. Panning or tilting the gimbal at 10°/s adds about 2 pixels across the frame; turning the drone at 10°/s while looking straight down rotates the image instead, adding up to about 1 pixel at the corners and none at the centre (calculated). Slow down over anything you want to look at closely.

## Conditions

Contrast is usually best at night and before sunrise, once the ground has cooled. On warm afternoons, sun-heated ground and rocks can be as warm as or warmer than a person. Rain, fog and wet clothing reduce contrast and range in the long-wave band.

## Getting the picture off the core

This core gives analogue CVBS (PAL / NTSC) for a live view through an analogue video transmitter, and USB 2.0 for a digital 640 × 512 feed. The analogue picture is interlaced and carries less detail than the sensor, so the pixel counts above apply to the digital feed. On a Windows PC the USB feed shows as a camera with no driver to install; for Linux or embedded hosts, confirm host support with us first. The core draws 650 mW or less (typical, USB output, 25°C, 5 V) and weighs 9 g without the lens; the 9.1 mm lens with flange adds about 13 g.

## Before you choose

- Altitude band and the smallest target you need to see

- Pixels on target at the top of that band

- Footprint per frame and the search pattern

- Lens focus range at your altitude

- Ground speed and gimbal rate

- Live view, recording, or both

We sell the MINI 640-2 imaging core for civilian applications. It is in stock, with no minimum order, and samples ship within one working day of payment.

[View MINI 640-2](https://thermal.torsuntech.com/products/mini-640-2/)

## Related guides

- [256, 384 or 640? Choosing thermal resolution by field of view and pixels on target](https://thermal.torsuntech.com/resources/thermal-camera-resolution-256-384-640/)

- [Thermal cores on drones, vehicles and trains: when the image smears and when the temperature reads low](https://thermal.torsuntech.com/resources/thermal-camera-moving-platform-blur/)

- [How wide, how far: choosing a lens for a 640 × 512 thermal core](https://thermal.torsuntech.com/resources/thermal-camera-lens-fov-distance/)

## Planning a drone thermal payload?

Send the altitude, the smallest target and how the picture leaves the drone. We reply within 24 hours on working days.

[Discuss your requirements](https://thermal.torsuntech.com/contact/)

---

TORSUN TECH · CATC Building 2, Shipai Town, Dongguan, Guangdong, China · info@torsuntech.com · Tel / WeChat / WhatsApp +86 180 2518 5996 · Enquiry: https://thermal.torsuntech.com/contact/
